Solar street lamps installed - — Solar garden lamp battery

Solar street lamps installed - — Battery installation time 1, the battery is placed on control box must be light to take light put, prevent broken control box; 2, battery cables must be between bolts on the terminal of battery and use copper gaskets to increase electrical conductivity; 3, the output line



to install solar street lamps - — Battery installation

1, the battery in the control box 【 The control box is used widely. 】 Must be within the light to take light put, prevent broken control box;

2, between the battery cables must be bolted on the terminal of battery and use copper gaskets to increase electrical conductivity;

3, output lines connected to the battery under any circumstances after ban short sub, avoid damage to the battery;

4, inside the output wire and telegraph poles of the battery controller connected must through PVC pipes;

5, after completion of the above, check the wiring controller, prevent short circuit. After the normal close the door of the control box.