【 Solar street lamps factory 】 LED lights must comply with the conditions

LED lights must be in accordance with what conditions to calculate qualified LED street light? Under the Australian photoelectric to tell you: 1. Light conversion rate 17%, Each square solar power is 1000 w, the actual efficiency of 170 w) 2. Current market street lamp lens material is improved optical material

what kind of LED lights must be in accordance with conditions to calculate qualified LED street light? The Australian photoelectric to tell you:

1. Light conversion rate 17%, Each square solar power is 1000 w, the actual efficiency of 170 w)

    2. Current market street lamp lens materials for the improvement of optical materials, LED street lamp, transmittance & ge; 93%, heat-resistant - 38 - + 90 degrees.

    3. LED street lamp lens, lens is mainly used for the LED street lamp, spot for rectangular, optical material, material is PMMA transmittance & ge; 93%, heat-resistant - 38 - + 90 degrees, resistance to UV ultraviolet ` etiolation rate for 30000 hours without change, etc. ,

& emsp;   4. The road illumination uniformity, 统一的道路surfaceilluminance) The average illuminance on the 0. 48. Spot ratio 1:2

& emsp;   5. In accordance with road illumination. （ Actual 1/2 center spot of 25 lux, 1/4 center intensity 15 lux, 16 meters minimum 4 lux light intensity, the overlapping intensity 6 lux.

    6. It has very good application prospect in the new urban lighting. The depth of the dimming, and the color will not change by the dimmer and other characteristics.

    7. To adapt to the humidity: & le; 95.

guangdong Macao special photoelectric technology co. , LTD. Is the production of solar street lights, led lights, traffic lights and other professional outdoor lamps and lanterns. If you want to pay more attention to the led street lamp, solar street lamps, pay attention to the guangdong Australia photoelectric technology co. , LTD.