Solar street lamps factory introduction to solar energy battery installation considerations

- -

solar battery is one of the important part of solar energy lamp, its installation is correct directly affects the solar lamp lights. So we should be careful when installing solar battery, solar street lamps factory today will give you a simple talk about solar battery installation considerations.

a, solar lamp installation personnel ( Or teams) Should carry a small amount of spare parts system ( Such as screws, etc. ) Arrived at installation site, made a detailed installation schedule, discuss project details ( Such as installation, bearing, etc. ) 。

2, battery solar street lamps before starting the installation, should organize the installation personnel ( Or teams) Training, this paper introduces the matters needing attention during the process of installation and battery usage and maintenance of the matters needing attention, the installation process must pay attention to safety.

3, solar lamp installation personnel ( Or teams) Counting of the examination of the battery box and accessories, accessories box installed battery system diagram, instructions and other documents receivable.

4, according to the solar street light construction drawings to check the location of the battery in the computer room is reasonable, whether the reserved space maintenance, and the heat source and keep a suitable distance may produce a spark.

5, at the start of installing solar lights out before you take out the battery system diagram, should be in strict accordance with the system diagram for installation of the battery, do not allow any omissions of the installation of the system software ( Including battery monomer number paste) , all system ( Spare parts) Installation drawing should be specified in the specifications.

6, during installation of solar system. Because the battery has been charged, attention should be paid to prevent it short out, insulating tape on all installation tools shall be bound.

article seven, solar lighting installation connected battery with a clean linen cloth to wipe the battery should be taken before a column and the dust on the enclosure and steel, in particular to ensure that clean the dust on the polar column. Single number to stick.

8, solar battery installed to inspect all the screws are tight. To appoint someone to check, and employee to make sure that all the screws in a tight state.

9, the solar battery installed after the inspection, measuring and recording all the open circuit voltage of battery monomer and the voltage of battery pack.

10, solar lamp after the installation, debugging, checking the battery appearance, at the same time to check each connection screws have tightened, ensure the battery shockproof, anti-skid and reliable connection between cells.

all in all, when installing the battery solar street lamps must pay attention to the problems mentioned above, otherwise will affect the solar lamp later use, if you have other problems in the installation of solar street lamps, can be directly consulting, solar street lamps manufacturer's technical personnel for your answer.