Solar street lamps before the installation which debugging work need to do?

6 meters according to planning the required daily solar street lamps lighting time, according to the instructions in the setup time controller manual control node. Every night illumination time shall not be greater than the value in the process of planning, only values equal to or less than planning, LED street light, otherwise it will shadow

6 meters according to the planning of the required daily solar street lamps lighting time, according to the instructions in the setup time control node controller manual. Every night illumination time shall not be greater than the value in the process of planning, only values equal to or less than planning, LED street light, otherwise it will affect the lighting;

　　2. Optical function simulation

if the connection during the day, the battery module of headlights may be light barrier block ( Or the battery module can be unloaded on the controller connection) 。 According to the controller manual mentioned in the delay time, check the solar street lamp can light up automatically after the corresponding time.

if you can light up, said normal function of the dimmer switch. If can't light up, the function of the dimmer switch is invalid. It is necessary to start from scratch to check the Settings of the controller. If the normal, please obstacles out of the solar cell module ( Or on the controller is connected to the battery module power cord) , the light will automatically fade, it shows that electric close function is normal.

after debugging solar street lamps controller, solar street light equipment before ascension, short test should be made for lithium batteries and other equipment to see if light can light up, to avoid until the equipment is complete, the light bulb to light up, maintenance will be a waste of time and increase the cost.

insert part of the solar street light internal components should be held firmly inserted, lest caused by loose duct and poor contact problem. 6 meters should be firmly fixed in light pole, solar street lamps light pole and bracket. This is the only way to ensure that equipment normal work.