Solar street lamps and steps to improve the attention to urban street lamp

Solar street light light pole lifting is the most important work, solar street lamps system must therefore be careful to do all the preparation work: 1, the first is to check the solar street light system parts if you have any questions such as knock against damage, connection is secure. Qing

solar lamp lifting is the most important work, solar street lamps system must therefore be prepared to the work: 1. First of all, to check whether there is any parts of solar street light system problems, such as collision damage and connection is reliable. Clean ground cage joint thread, and then the assembly - street lamp system The solar panels fixed on the solar panels bracket and connection ( Note the polarity) , will the screw-in and fixed on the light pole, lamp holder line installed in the lamp on the arm and fixed on the light pole, lamp holder and solar panels should be beyond the light pole connecting line between the points 20 cm; 2. Prepare lifting, carefully check all parts, fasteners, whether fastening lamp holder is correct direction. After everything is ok, can be carried out in accordance with the lifting safety operation procedures (lifting At this time must pay attention to safety) 。 3. In the process of ascension, must pay attention to the direction of the solar energy battery components and lamp cap, in order to ensure that when the strongest solar modules installed sun light hitting the solar panels to the vertical. When lifting integrated traffic lights, fixed light pole, observe light pole can't deflection. 4. Wiring connection, at this time must be in accordance with the instructions. Different controllers have different requirements. Our company produces the time control and optically controlled intelligent controller for solar street lamps to load, then the battery, finally the solar panels. In the process, must pay attention to the corresponding indicator light flashing, absolute guarantee of solar street lamps controller all wiring and terminals will not make a mistake, across the electrodes of battery not short circuit. 5. The solar street light system working properly. Sealed wiring, straighten out the connection and close the port ( Control box) 。