Solar street lamp manufacturers talk about the precautions of solar battery installation

Solar storage battery is one of the important components of solar light. Whether it is installed correctly or not directly affects the lighting condition of solar light. Therefore, we must be very careful when installing solar batteries. Today, solar street light manufacturers will briefly talk about the precautions for installing solar batteries.

1. The solar lamp installer (or engineering team) should bring a small amount of system spare parts (such as screws, etc.) to the installation site, obtain a detailed installation project schedule, and discuss project details (such as installation methods, load-bearing conditions, etc.).

2. Before starting the installation of solar street light batteries, installers (or engineering teams) should be organized for training, introducing precautions during the installation process, battery usage methods and maintenance precautions, and safety must be paid attention to during the installation process.

3. The solar lamp installer (or engineering team) conducts unpacking inspection of the battery and inventory of accessories. The battery installation system diagram, installation manual and other documents in the accessory box should be received.

4. According to the construction drawings of the solar street light, check whether the battery is placed in the machine room reasonably, whether the maintenance space is reserved, and whether there is a proper distance from the heat source and the place where sparks may be generated.

5. Open the box and take out the system diagram of the battery before starting to install the solar lamp battery. The installation should be carried out in strict accordance with the system diagram of the battery, and the installation of any missing system components (including the paste of the battery cell number) is not allowed. All system parts (spare parts) should be exactly the same as the model specifications specified in the installation drawing.

Six. Pay attention to the solar energy system during installation. Since the battery is already charged, care must be taken to prevent short circuits. All installation tools must be wrapped with insulating tape.

VII. Before installing the connecting strip, wipe off the dust on the battery pole, shell and steel frame with a clean linen cloth, especially to ensure that the dust on the pole is wiped clean. The unit number must be attached firmly.

8. After installing the solar battery, check whether all the screws are tightened one by one. A special person should be appointed for inspection, and a special person is responsible to ensure that all screws are in a tightened state.

Nine. After the solar battery installation inspection is over, measure and record the open circuit voltage of all battery cells and the total voltage of the battery pack.

10. After the installation and commissioning of the solar light, check the appearance of the battery, and at the same time check whether the connecting screws are tightened, to ensure that the battery is shockproof, anti-skid and the battery connection is reliable.

In short, you must pay attention to the problems mentioned above when installing the solar street light battery, otherwise it will affect the later use of the solar light. If you encounter other problems in the installation of the solar street light, you can directly consult the manufacturer, the technical staff of the solar street light manufacturer Answer for you.