Solar street lamp lights daqing city in layout design

Solar street lamp installation layout design is very important, generally speaking when have shops on both sides of the road or window lighting degree is higher, can adopt the way of center cloth lamp solar street lamps. In a comparatively wide highways or lane has upper and lower points,



solar street lamp installation layout design is very important, generally speaking when have shops on both sides of the road or window lighting degree is higher, can adopt the way of center cloth lamp solar street lamps. In a comparatively wide highway 【 The highway belongs to high grade highway. 】 There or upper and lower points on the driveway, can also adopt the center cloth lamp. But if there is a pole road on both sides, you can pull a rope, lifting over the road centerline of the lamps and lanterns, can also pull wire cloth lamp on the barrier. Usually the width of the road in 12 ~ 15 m of secondary and tertiary roads' Level 3 road is one type of our country highway grade, before after the secondary roads and fourth class roads, widely used in the practical road construction, belongs to the most basic important type of road. 】 Light, often using the centerline cloth. Advantage is relatively even illumination. The disadvantage is that lamps and lanterns is in the center of the road maintenance is not very convenient. When the road width is greater than 15 m, and more vehicles and pedestrians, and emphasizes the beautiful, can be used on both sides of the cloth lamp or bilateral symmetry cloth lamp. In actual design, tend to be restricted by many objective conditions, such as the road is wide and there is only one cloth light, solar street lamps elevation may be increased, generally can be increased to 15 degree Angle. If the Angle is too large, the luminous efficiency of lamps and lanterns is reduced, and prone to glare. Recommended reading: solar energy street lamp installation should pay attention to