Solar street lamp installation steps

For street light products, it is only through the correct installation, can provide better lighting effect, seemingly simple installation of solar street lamps, also needs certain installation steps, to play out the value of the solar street light. So the installation of solar street light

for street light products, only through the correct installation, can provide better lighting effect, seemingly simple installation of solar street lamps, also needs certain installation steps, to play out the value of the solar street light. So what are the installation steps of solar street lamps? Lighting small make up to summarize what time today, you can reference, provide the correct installation. 1, solar street lamp installation site prior to installation, need to make sure good street lamp installation location, for the first solar street lamps, must choose light to compare good place, there can be no trees or tall buildings, otherwise it will directly affect the light barrier, cannot install where backlight, for power conversion efficiency has a direct impact. 2, solar street light for solar street light foundation, the foundation, it relates to the safety of the light pole, is directly related to the foundation and the surrounding geological, if the surrounding soil humidity is low, the intensity is high, will directly affect the safety of the light pole, so for the foundation stability is also very seriously. 3, connection part of the solar street lamps in the process of use, must use waterproof power, solar street light wiring process not allowed inside the light pole have power connection, a connection, lamp holder and the power supply first, then connect the solar panels, if it is the day, lamp holder and the power supply plug in is normal light is right, but after connected to solar panels, lamp light is normal, don't post must clear order. 4, solar street lamps before the stud to put all of the configuration, and check the power cord once, see if there is leakage of poling process, must pay attention to safety, adjust the direction of the light pole, in the process of screw fastening seed leveling, not tilt around before and after the migration, all the work finished, the Angle of screw fastening over, to firmly fixed. 5, after the installation after the installation is complete, be sure to check whether installed, solar street lights in the factory is only 30% of the battery, so need to go through 15 20 days to resume normal work. For solar street lamp installation steps, must be installed in the correct order, only in this way can ensure the solar street lamps lighting the normal work, if there is a demand for solar street light products, welcome to lighting technology co. , LTD. , choose suitable street light products.