Solar street lamp installation steps of solar street light function?

The lifting rope wear in light pole appropriate location; Slowly up the lamps and lanterns, pay attention to avoid the crane rope scratched solar cell components; Adjust process, when the solar street light completely off the ground or out of the vehicle in full, at least two installation personnel using the wrench

will wire wear in the appropriate position of the light pole; Slowly adjust the lamps and lanterns, pay attention to prevent crane rope cut solar energy battery components. In the process of start, when the solar street light completely off the ground, or leave the load completely, there are at least two clips flange installation personnel use wrench, in order to prevent the top of the lamp with the hoist rope friction, and prevent the damage due to the bottom of the swing in the process of start plastic spray coating or even more. When light lifting directly to the foundation above, slowly put down the lamp, at the same time turns a light pole and adjust the lamp cap towards the road, land pointed bolt at the flange plate of long hole; Fall, after on the basis of flange plate set into the flat pad in turn 30 ( 24) or flat mat , 30 (elastic cushion Or the elastic cushion 24) And (( Or m2-m24) The nut, and clean adjust light pole verticality. If the light pole is not perpendicular to the ground, can mat under the light pole flange gaskets, make its perpendicular to the ground. In the end, even tighten nut with a wrench, tighten the screw thread locking glue should be applied before. For m2-m24 bolts ( 8. 8) , tightening torque for 650. 6). For (bolt ( 8. 8) , tightening torque for 1292. 5). Remove the sling.

check whether solar modules facing south, or adjustment. Adjust the direction of the solar energy battery components: use the necessary devices will be installed (with 1 ~ 2 person) To the right height. Installation personnel to use wrench loosen bolts and screw down the upper light pole module one by one. Then, according to the compass, the upper module light pole torsion to the appropriate location. Finally, the bolt tight upper light pole module individually, and ensure that all bolt stress evenly.

shandong photoelectric technology co. , LTD. , supply solar street lights, and to provide the latest quotation of solar street light. It is a professional manufacturer of solar street lamps and distributor.