Solar street lamp installation notice small solar street light is introduced

When used, in order to ensure the beautiful and battery components can receive better solar radiation, please every half an year is clean the dirt on the battery components, but don't rinse area from the bottom up. Solar street lamps controller connection. Should try to use waterproof controller, protect

use, in order to ensure that the appearance is beautiful and the battery pack better receive radiation from the sun, please clean once every six months the dust on the battery pack, but don't rinse area from the bottom up. Solar street lamps controller connection. Should use waterproof controller as far as possible, in order to ensure the long-term stability, and prevent users to change the illumination time. If you use the waterproof controller, because the terminal blocks down, so the connection bent into a U shape, so as to prevent water from a line into the controller. Should persuade customers to use better quality of copper core. Due to the electrical conductivity, current and voltage loss in the process of the output, this not only increases the power consumption, and in severe cases can lead to led drive power supply failure. I have found a problem in a construction site. Drive power supply parameters set up correctly, laboratory. However, after installed on the lamp holder, 15 seconds with the lights burning out. Solar street light battery during charging or store can produce combustible gases (slightly Hydrogen) , so don't put battery in the central storage temperature for 10 - 25 ℃, because there was easy to produce sparks to prevent direct sunlight. ( : the above content according to the solar street light price release]