Solar street lamp installation method is correct

In the installation of solar street lights, must pay attention to the method, the error of installation is easy to cause the product to the normal work, but also easy to product accessories damage happens, thus it can be seen that it is very important to master the correct installation method, then the following solar street lamp manufacturers to explain to you the correct installation method.

first, first to install light pole, the position of the light pole being resolved, it is best not to change easily, then there is the question many accessories such as the light source and solar panels and battery wires shall be conducted and the controller connection, light wires and wire to connect battery, can shine to see whether the light source, if not bright light source is likely to be wire is negative to connect appear a mistake, and this kind of situation will not bring to light damage, so you can rest assured for debugging.

the second, the multimeter to find battery are the anode, let the positive wire connected to the controller is the position of the red line, the location of the negative electrode wire is connected to the black line, it is very simple for installation personnel, if there is no bright light source, you need to adjust the panels are negative.

the third, the controller when install, don't need to adjust, because solar street lamps manufacturer has been adjusted, when I was in the production of people, as long as they are on the normal installation to ensure the normal operation of the controller.

4, when the battery installation, be sure to twist screws, and will use waterproof line pipe, this can effectively prevent battery electrical system on a rainy day happen.

everybody as long as the solar street lamps factory introduce according to above requirements for installation, won't cause any damage to the product, thus to ensure that the products of normal lighting, if he will not follow, then can look for professional companies.