Solar street lamp installation foundations how to patch the street lamp?

Solar street lamps installed base how to play? 1, ensure that the location of the floor lamp; Survey and geological conditions, if the surface of the 1 m 2 are all hodgepodge of soft soil, the excavation depth should be deepened; Unearthed position all at the same time, make sure there are no other facilities ( Such as cable,



solar street lamp installation foundations how to play? 1, ensure that the location of the floor lamp; Survey and geological conditions, if the surface of the 1 m 2 are all hodgepodge of soft soil, the excavation depth should be deepened; Unearthed position all at the same time, make sure there are no other facilities ( Such as cable, pipes, etc. ) , street lamp for a long time without a shadow of the top of the object, otherwise should change its position. 2, in this state of lamps and lanterns ( Excavation reserved to accord with a standard 1 cubic meters of pit location, the location of the embedded parts and casting embedded parts are placed in the middle of the square hole, PVC threading pipe embedded part right. The middle, it is the battery, Above) On the other end. Keep the insert, foundation and ground in the same horizontal plane ( Or on the surface of the screw and at the same level at the top of the original foundation, according to the request site) Should be parallel to the side of the road; After this can ensure that the light pole and not skewed erect fixed correctly, and then to C20 concrete pouring, casting or stop using the vibrator in the process of vibration, in order to ensure the overall. Density and durability. 3, complete, clear in time excess sludge and waste oil cleaning bolt positioning plate impurities. 4, concrete solidification process, water maintenance regularly; The concrete setting ( Usually more than 72 hours) The ability to install droplight,.