Solar power grid is the development trend of double module double glass?

Double double glass component weight will increase to a certain extent reduce or offset the gain on the back of the return on investment? The component weight loss brought about by the project cost savings of 100% can be enough to support industry capacity conversion? We can calculate a bill, a set of

double double glass increased the component weight will reduce or offset gains on the back of the return on investment? Components to reduce the project cost savings of 100% will be enough to support industry capacity conversion? We can calculate an account: 25% of the components means that 3% of BOS (weight loss System balance) Cost savings, including 15% of the cost of support structure, 20% of the labor costs associated with components installed, and 5% of the operating and maintenance costs. Double the height of the components of the framework need to improve, to get back to capture more of the reflected light. The best highly generally is 1. 5 meters. If you use a fixed support structure, often need more than one part Angle, and under the condition of strong winds carry more load. Need more solid the basis of support structure design to cope with the increase of unit weight and strong winds under the condition of load, so it need higher cost. Double the combination of technology and tracking stents can bring the best power performance. For single axis tracking support system, double the weight of the component by 25% can greatly reduce the pressure on the framework, thereby eliminating the need for foundation reinforcement and reinforcement materials, so as to reduce the cost of support. In pursuit of a better power performance, double-sided combination of technology and tracking stents arises at the historic moment. For single axis tracking support system, double the weight of the component by 25% can greatly reduce the pressure on the framework, thereby eliminating the need for foundation reinforcement and reinforcement materials, so as to reduce the cost of support. Some photovoltaic power station in the bad environment, such as, saline-alkali land, mountains, coastal waters pollution of land, wasteland, high-rise roof, car tent, agricultural land, To a certain height to ensure crop growth) And so on. , or of a specific project involving artificial and high logistics costs, reduction in weight caused by the double cost savings will be even higher. As a result, we can foresee, in a longer warranty period, lower attenuation rate, lower prices and weight will be the development trend of double component in the future. Relevant tags: solar panels, solar panels, solar battery charging board, makers of solar panels