Solar photovoltaic street lamp manufacturer can street lamps and lanterns installation steps

Solar street lamps are widely used for its unique advantages, the yangzhou yingli solar street lamp manufacturers to introduce in detail the installation of solar street lamps and lanterns. The working principle of solar street light sunlight for energy solar street lamps, white



solar street light is widely used due to its unique advantages, the yangzhou yingli solar street lamp manufacturers to introduce solar street lamps and lanterns installation steps in detail. The working principle of solar street light sunlight for energy solar street lamps, solar panels during the day' Solar panels, 太阳能板) Is by absorbing sunlight, the solar radiation through the photoelectric effect or photochemical effect directly or indirectly converted into electrical energy device, the main material of most of the solar panel as the 'silicon', but because of the production cost is larger, so it widely used, we still have some limitations. 】 For battery and battery at night for power supply using a light source, without complex and expensive pipeline laid, can be arbitrary adjust the layout of the lamps and lanterns, safety and energy saving no pollution, no manual operation is stable and reliable work, saving electricity maintenance free, solar street light for a loop at the same time, without having to worry about as ordinary street lamp line is broken and overall is not bright. Solar street lamps and lanterns installation steps 1, for each part component is fixed: solar panels fixed on the bracket of solar panels, lamp holder to pick arm, then stent with arm fixed to the main stem, and wear the cables to control box 【 The control box is used widely. 】 ( Battery box) 。 2, light pole before operation, each part of the first check fasteners, lamp holder to install whether correct, light work is normal, and then the simple and easy to debug the system work is normal, loosen the solar panels on the controller cable, light work. 3, the main light pole lifting, pay attention to safety, good absolute fastening screws, sunrise Angle deviation, such as the component needs to adjust the direction of the sun completely up to end toward the south. 4, put the battery into the battery box, according to the technical requirements for the connector to connect to the controller, battery first, then the load, and then connect the solar panels. Connection operation is important to note that each terminal with indicated on the controller cannot be wrong, plus or minus two polarity can't collision, can't meet the, otherwise the controller will be damaged. 5, debugging system work is normal, loosen the controller on the solar panels cables, lights, solar panels cable is connected, light, careful observation of each indicator light on the controller changes at the same time, all belong to the normal, sealed can control box.