Under normal circumstances the height of the solar led street lamp in 6 - 12 m, mainly divided into single arm LED lights LED lights and arms. Ignored by many solar led street lamp at the design level of a problem is the heat dissipation of lamps and lanterns, so our lighting lamps
all normally solar led road lamp ratio in 6 - 12 m or so, mainly divided into his arms LED lights and LED street lamp arm. In the aspect of the design has been ignored for a lot of solar led street lamp production is a difficult lighting lamps and lanterns of the heat pipe heat dissipation, so everyone in the design of road lamp lighting lamps and lanterns of street lamp production conditions, be sure to lighting lamps and lanterns of the heat pipe radiator with care. Everything from solar led road lamp under normal conditions of the heat pipe cooling way is divided into two kinds: 1, the passive radiator: according to the led road lamp light body surface and gas heat convection, of course, will lead to the energy out of led road lamp. 2, active heat pipe cooling is mainly according to the water cooling, the surface of the heat pipe radiator cooling fan to improve the speed of gas liquid to send to the energy on the radiator, increase the speed of heat pipe radiator. If according to the differentiation characteristics mainly are: thermal convection heat pipe radiator, modified cooling fans, of course, mandatory heat pipe radiator, radiator and control loop heat pipe radiator, etc. Modified form and system cooling fan forced heat pipe radiator is multifarious, low reliability, radiator and the way of control loop heat pipe radiator costs rise. And road lamp has evening outdoor use, heat pipe radiator surface limited is located in the top side and build a smaller benefit gas such as the advantages of heat convection heat pipe radiator, of course, so the net make proposal LED LED street lamp picture light as far as possible choose heat convection heat pipe cooling way, of course.