Solar garden lamp post

Believe everybody knows where some high wind speed, air volume big, almost every year has light pole is the wind blow down the accident, lamps and lanterns for the wind damage is often happened, the phenomenon of aeolian dust is the important cause leading to the brightness of lamps and lanterns serious attenuation. So we



believe everybody knows where some high wind speed, air volume big, almost every year has a light pole is the wind blow down the accident, lamps and lanterns for the wind damage is often happened, the phenomenon of aeolian dust is the important cause leading to the brightness of lamps and lanterns serious attenuation. Therefore, we in choosing a solar street lamp, not only should consider its beautiful and use function, more important is to pay attention to the wind of lamps and lanterns and light pole and dustproof function, only in this way, in order to ensure the safety of street lamp in the urban infrastructure, bring convenience to the production of all travel and life. Solar street light wind dust what information?

1, lamps and lanterns

as an important part of street lamp of lamps and lanterns, the quality and open means of lamps and lanterns is very important, the material must be aluminum casting alloy, thickness to meet the requirements, do not allow the lamp body has cracks, holes, parts, joint should have good contact card buckle is the top priority, the lamps and lanterns of previous because of card buckle design is not reasonable, causing damage every time after the wind has a large number of lamps and lanterns, therefore, to use spring card buckle on lamps and lanterns, install two best, lamps and lanterns of open the upper straight away, and ballasts and other important components are fixed on the lamp body, prevent damage of chimney, parts fall off cause safety accidents.

2, light pole,

light pole height must be chosen according to the road width and usage, wall thickness to 3. More than 5 mm, inside and outside the hot dip galvanized, galvanized layer thickness for more than 35 microns, flange thickness above 18 mm, and between flange and light pole to weld reinforcement, to ensure the strength of the bottom of the light pole. In the past because of the light pole galvanized unqualified and without welding stiffener, lead to the bottom of the light pole corrosion is serious, blow off the phenomenon of light pole. Light pole, therefore, wall thickness, the thickness of the galvanized and whether to add weld reinforcement is an important symbol of light pole qualified or not, otherwise can't use.

3, basic

street lamp base as a street light project take cover engineering, wind and safe use of the whole street is also very important part. First of all, should choose to C20 concrete pouring, anchor bolt 【 Mechanical components are installed on the concrete foundation, the bolt of the J shape, one end of the l-shaped embedded in concrete are used. 】 Choice according to the height of the light pole, 8 m light pole should choose Φ 20 bolts, length of 1100 mm, base depth 1200 mm; 10 m light pole to choose Φ 22 bolt, the length is 1200 mm, base depth 1300 mm; 12 m light pole to choose Φ 22 bolt, length of 1300 mm, base depth 1400 mm; Base, lower than the upper size is beneficial to the stability of the foundation, enhance the wind resistance.

the above only for high wind speed, air volume big areas use parameters, the specific requirements can contact sea ray illumination.