Solar energy lamp solar lamp foundation engineering construction process and the note

Solar street lamps at the top of the step, the most important thing is to do root, like production house. No matter what you do, life is always the most important. Foundation is used in the fixed structure of the solar street lamps, but also have placement and protection effect of the battery. Because the

install solar street light is the most important step is to lay a solid foundation, like building a house. No matter what you do, base is always the most important. Base is used in the fixed structure of the solar street lamps, also has the place and protect the batteries. Because of various height and size of wind solar street lamps, solar street light have different intensity of root. In the process of construction, ensure the intensity of the roots and structure in accordance with the design requirements. According to the situation of the construction site, solar street lamps manufacturer has the responsibility to have challenged device location of irrationality, and will in the first case report to the relevant person in charge. Rectification must be finished within a time limit in accordance with the actual construction standards. Install solar street lamps roots cage process is as follows: 1. In strict accordance with the root the size of the excavation pit road (solar street lamps The construction scale is decided by construction personnel) ； 2. In the foundation, buried on the cage of the surface must be level ( Through the level measuring and testing) 。 Cage on the anchor bolt must be perpendicular to the upper surface (the root With square measuring and testing) ； 3. Place 1 -, after the completion of excavation 2 days to investigate whether there is leakage of groundwater. If there is leakage of groundwater, immediately suspend construction; 4. Ready before construction foundation the tools needed to solar street lamps, and select the construction experience of the construction personnel; 5. In strict accordance with the figure to choose the appropriate cement ground solar street lamps. For high soil ph, must use the special cement resistance to acid and alkali. Fine sand and stone must not contain any impurities that affect the concrete strength, such as soil. 6. It is necessary to real root cage surrounding soil pressure; 7. It is necessary to fill in 6 m light pole manufacturer box at the bottom of the drain, solar cell module is placed at the bottom or according to the appended drawings. 8. Before construction, must be sealed on both ends of threading pipe, prevent foreign body after construction or enter or congestion, make the device installed when threading difficult or impossible; 9. Basis after the completion of the solar street lamps, demand will keep 5 to 7 days ( According to climate conditions) ； 10. Solar street lamps can be connected in solar street light roots after installation. Above is the key and matters needing attention in the process of solar street light foundation construction. We must pay attention to these problems when laying the foundations. In this way, can ensure the global stability of the solar energy lamp posts.