Solar controller

The use of the solar controller: ( 1) Use the M4 screws reliable support controller or flat surface. （ 2) After the connection lamp ( Note the polarity of the main light) , package with insulation belt joint connection. （ 3) Check the battery voltage. First, it should be



solar controller' Called the solar controller solar charge controller, is used for solar power generation system, the control of multiple solar cell phalanx of battery and battery for solar power inverter load automatic control equipment. 】 The method of use:

( 1) Use the M4 screws reliable support controller or flat surface.

( 2) After the connection lamp ( Note the polarity of the main light) , package with insulation belt joint connection.

( 3) Check the battery voltage. First of all, it should be the correct voltage controller, stop work voltage range is different. When the battery voltage is less than 10. 7 v, please recharge. As some connection batteries, digital tube ( Note the battery polarity) , if it is bright, this means that the battery connection are correct, if not, please in polarity connection, open the cable, and damage to the battery. After the connection of UPS, with insulation tape.

( 4) Check. The first thing to check is the voltage, the voltage regulator should apply to the solar panels Solar panels, 太阳能板) Is by absorbing sunlight, the solar radiation through the photoelectric effect or photochemical effect directly or indirectly converted into electrical energy device, the main material of most of the solar panel as the 'silicon', but because of the production cost is larger, so it widely used, we still have some limitations. 】 Stop work, voltage range is different. As solar panels shown in connection to the controller panel will bright lighting throughout the sun &; , if not, please check the polarity of the solar panels. ）

( 5) The controller has two work modes: U” For lighting control mode, P” Compared to normal control mode, advocate the lamp work time setting options: 15 hours, 1 hour Once the short press SET” The key is equal to an hour.

the LED digital tube' Led digital tube ( 领导段显示) By multiple leds encapsulation together 'eight' word, lead has been done in the inside connection, only lead to their each stroke, public electrode. 】 Display the symbol meaning

& uuml; Lighting control mode, advocate the lamp to start the work after the sunset and sunrise or edit cut off timer.

N any meaning, banning the use of this model.

P normal control mode, and continue to advocate the lamp circuit power supply

0 U advocate the lamp, after the sun set, the morning after getting up close.

Ñ Pattern is pointless, banning the use of this model.