loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

Solar controller using method of old street lamp solar street light

With the rapid development of economy in our country, urban and rural infrastructure to improve continuously, the old road left many traditional street lamp. In the old street lamp, the damage of long not bright, Or is the old products, high energy consumption, and the current social advocate green energy-saving



with the rapid development of economy in our country, urban and rural infrastructure to improve continuously, the old road left many traditional street lamp. In the old street lamp, the damage of long not bright, Or is the old products, high energy consumption, and the current social advocate green energy saving low carbon environmental protection is not consistent, need to upgrade, etc.

to many second type three kinds of road, the original power supply main body changes along with the social reform, no longer undertake the task of power supply. This kind of update project, solar street light Solar street light is a crystalline silicon solar battery power supply, valve control type sealed and maintenance-free battery ( Gel battery) Store electricity, super bright LED as light source, lamps and lanterns and controlled by the intelligent charging and discharging controller, is used to instead of the traditional public power lighting lamps. 】 Is the optimal replacement upgrade scheme. Depend entirely on solar radiation to produce electricity, solar street lamps zero electricity generation, electricity dispute solution. And solar street lamp automatic operation, do not need to care management.

based on the principle of waste not, economic construction, the original street light pole still can continue to play a role, only need to remove old lamp holder, switch to solar street light.

but the actual updates, because the lamp posts around the different modelling, conventional solar street light only match light pole, encounter problems. Often lead to scrap in new light pole, the promotion cost, make the update project could not proceed. In view of the above situation, our company KaiKangShun technology put forward some of the old street lamp retrofit scheme, for your choice.

we look at the road lamp posts of several common market:

according to the above, part of the light pole is not suitable for use solar street lamps, especially solar panels 【 Solar panels, 太阳能板) Is by absorbing sunlight, the solar radiation through the photoelectric effect or photochemical effect directly or indirectly converted into electrical energy device, the main material of most of the solar panel as the 'silicon', but because of the production cost is larger, so it widely used, we still have some limitations. 】 Not directly pick up on the light pole, reform is very difficult, hard to avoid to drilling and welding, materials and artificial cost even higher than the new lamp posts.

in view of the above lamp posts, in combination with our products, we give some retrofit scheme, for your reference.

single arm light pole transformation:

for this kind of lamp posts, relatively easy, already close to the solar energy light pole standards, can be converted into integrated solar street light or traditional split type solar energy 【 Split type solar energy is the sun radiation energy collector to heat by forced circulation pump through the pipe between the collector and water tank connection, gradually gathered a solar water heater tank. 】 Street lamp. We have two kinds of products.

fission street lamp transformation method of use:

below is split type solar street lamps lighting products, solar panels, support is included, energy storage module, and street lamp head, you just need to light pole collocation.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service