Shenyang solar street light

How to install solar street light wind machine? The installation position of solar street light wind machine is hard to choose. Under normal circumstances, the need to understand the meteorological data for many years, and after many years of actual, consider other comprehensive factors, to determine the installation location of wind turbines. Too

how to install solar street lamps wind turbines? Solar street light wind turbine installation location is difficult to choose. Under normal circumstances, it is necessary to understand the meteorological data for many years, after many years of actual measurement, comprehensive consideration of other factors, determine the installation position of wind turbines. Installation of wind turbines, solar street lamps should pay attention to the following: 1, try to avoid the wind shadow solar street light list ring of turbulence. Turbulence is caused by the wind through the rough surface or obstacles caused by a sharp change of wind speed and direction. Turbulence to lower the output power of wind turbines, and cause the vibration of the wind turbine, to produce noise and affect the service life. In order to avoid the influence of turbulence, wind turbines should be installed in a relatively open bare place, and keep a certain distance with houses. 2. To determine the main local wind. The wind turbine shall be installed in the main direction of the upper. For example, in most parts of Inner Mongolia, northwest wind often blows, so wind turbines should be installed in the northwest of the house, in order to reduce the house to the shelter effect of the wind. 3. Pay attention to wind turbine installation height. Sometimes wind vertical shear will affect the operation of wind turbines, so should choose suitable wind turbine installation height. In general, there are many obstacles when wind turbines must be installed in and obstacle relatively close to the houses nearby, the wind turbine installation height must increase. Solar street lamps require greater maintenance can last longer. Solar street lights maintenance methods are as follows: 1) Don't let the noise of rigid objects or sharp objects hit solar panels, otherwise it will damage the solar panels. 2) Don't let the branches and billboard cover surface when using, so as not to affect the conversion efficiency. 3) Keep the surface clean. Advice once every six months to clean solar panels, otherwise it will affect the conversion efficiency. 4) When installing solar to 30 degrees to the south.