Shandong light, how should maintain?

Shandong light, is refers to the light pole height is equal to or greater than 20 m, as urban roads and road, square, stadium, airport, port terminals and other large area lighting, lighting facilities. Light is divided into fixed ( Single or multiple column) , elevating ( Electric hoist or manual



shandong light, 【 Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 Refers to the light pole height is equal to or greater than 20 m, as urban roads and highways 【 Connection between urban, rural and industrial base, mainly for the car and have a certain technical standards and according to the way of highway facilities. 】 , squares, stadiums, airports, ports and other large area lighting mast lighting facilities. Light is divided into fixed ( Single or multiple column) , elevating ( Electric hoist or manual lifting) , hydraulic tilting type three types. Light, which are frequently used at present is electric lift high lamp - By the light plate, light pole and base, elevating work station, power distribution system and lightning protection components. Then the following by shandong yu sheng lighting in detail for you under the shandong light maintenance.

shandong light, is refers to the light pole height is equal to or greater than 20 m, as urban roads and road, square, stadium, airport, port terminals and other large area lighting, lighting facilities. Light is divided into fixed ( Single or multiple column) , elevating ( Electric hoist or manual lifting) , hydraulic tilting type three types. Light, which are frequently used at present is electric lift high lamp - By the light plate, light pole and base, elevating work station, power distribution system and lightning protection components. Then the following by shandong yu sheng lighting in detail for you under the shandong light maintenance.

1, check the mast lighting all the black metal artifacts ( Including light pole wall) The hot dip galvanized 【 Hot dip galvanized, 镀锌) Also called hot dipping zinc and hot galvanizing, is an effective way of metal corrosion, mainly used for metal structure industry facilities. 】 Corrosion situation, fastener locking measures is in accordance with the requirements.

2, check the vertical degree is high lighting ( Must be conducted according to the requirements in accordance with the provisions, regular use theodolite measuring and testing) , bar is a bit of permissible error should be less than bar high 3 ‰. Light pole axis straightness error shall not be greater than 2% of the rod.

3, the inspection for the surface of light pole and weld corrosion situation, to experience a long standing but cannot to change again, if necessary by ultrasonic and magnetic particle inspection testing method to test the weld and test.

4, check the lamp panel mechanical strength, ensure the safety of the lamp panel, for enclosed lamp panel should check the cooling condition of it.

5, check the bracket of lamps and lanterns of fastening bolts, reasonably adjust the lamps and lanterns of projection direction.

6, carefully check the light dish wire ( Soft rope or cord) Usage, see whether or not the wires are excessive mechanical stress, whether there is aging, cracking and the dew line, etc. , in the event of unsafe phenomenon should be dealt with immediately.

the above is in shandong light maintenance related introduction, I hope it can help you, thank you very much for reading! If necessary, welcome to inquire!