Setting method of inner light transmission in night scene lighting

Setting method of inner light transmission in night scene lighting

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e With the increasing use of glass curtain walls as building facades in urban architecture, the internal light transmission method is being used by more and more lighting designers.

u003cbru003e

u003cbru003e

u003cbru003e Single use of internal translucent lighting

u003cbru003e

u003cbru003e

u003cbru003e Single light source

u003cbru003e

u003cbru003e

u003cbru003e Set a light source in each window so that the light source can directly show through the window. The light source can be point-shaped or linear. The overall night view of the building is formed by the combination of all window lighting effects of the entire building. The unit lighting composition is relatively simple. Suitable for small buildings.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Multiple light sources

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Set up multiple light sources in each window, and combine them into patterns, so that the light sources can directly show through the window. This method makes the unit lighting composition have content, and also makes the overall building night scene more layered and changed, suitable for larger Used on some buildings.

u003cbru003e

u003cbru003e

u003cbru003e Ceiling mounted lamps

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Set up lamps on the ceiling near the window to illuminate the ceiling and wall near the window, while the interior of the room is arranged with reduced lighting, forming a strong fading change in brightness from the window to the depth of the room This technique allows people to experience the depth of the room and the building through the change of the lighting effect of the window.

u003cbru003e Separate internal light transmission and external projection light in different parts of the building

u003cbru003e

u003cbru003e

u003cbru003e The main facade of some buildings is a large hidden frame glass curtain wall, but the partial facades such as the top structure, bottom podium or frame are solid walls. In this case, the glass curtain wall part of the building can be designed in Translucent lighting, and the design of external lighting on the solid wall, forming a contrast effect.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003eCombination of internal light transmission and external projection light

u003cbru003e

u003cbru003e

u003cbru003e Some buildings use glass curtain walls as the main part of the facade, and at the same time there are wide strip-shaped solid walls or metal plate walls between the glass; while the main body of some building facades is a solid wall structure, but there are arranged in between Lots of neat windows. For this kind of façade form, the form of internal light transmission at the glass window and external light projection at the solid wall or metal frame plate can be adopted.

u003cbru003e

u003cbru003e

u003cbru003e When using this kind of lighting method, you should pay attention to the coordination and contrast of the two lighting methods. Otherwise, the similar internal and external lighting effects will cause the overall effect to be dull and congested, while the difference or conflict between the internal and external lighting effects may lead to The overall effect of confusion.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Internal light transmission with architectural contour lighting

u003cbru003e

u003cbru003e

u003cbru003e If the building has a graceful outline or there are some prominent and graceful components on the building facade, the line formed by line light sources or point light sources can be used to outline the outline of the building or component.

u003cbru003e

u003cbru003e

u003cbru003e At the same time, with the internal light-transmitting lighting of the building, it can also form a vivid lighting effect. At this time, the internal light-transmitting should be in the form of illuminating the entire room, so that the effect can form a better contrast and supplement.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Combination of uniformly set lights and freely turned on internal light

u003cbru003e

u003cbru003e

u003cbru003e In some buildings, most windows are not deliberately designed for internal light-transmitting lighting, but each household turns on the lights in the room according to their own needs. In this case, the brightness and darkness of each window, and the length and shortness of the lighting time form a completely random state.

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e

u003cbru003e Therefore, if we then set up some fixed and orderly internal light-transmitting lighting in certain parts of the building that are suitable for uniform installation of internal light, such as stairwells, equipment rooms or public corridors, or in the building Some solid wall façades or components are provided with some external projection lighting, so that the remaining part of the building remains constant lighting for a long time, forming a striking focal point of the landscape, so as to control the colorful dots on the building Dynamic lighting forms a night landscape effect that combines dynamic and static, and echoes orderly and disorderly.