Science: solar energy street lamp installation note 7 big mistake

Solar street lamps installed more and more, a lot of places can be seen everywhere, thanks to the advantage of solar energy street light itself, green environmental protection, landscaping, ease of installation and maintenance. But, at the time of installation of led solar street light, still need us to pay attention to some details, avoid some pitfalls. Take a, led solar lamp installation place to avoid obstructions is too much, led to the decrease of the efficiency of solar panels charge. Such as leaves, buildings and other obstructions blocking light, affect the absorption and utilization of light energy. Solar panel mounted on a wire, the branches, the bottom of the light pole or other obstructions caused a shadow on the solar panels during the day. Batteries for solar panels are generally more string, if solar panels a string appeared on the battery piece of shadow, shadow and more deep, serious, this is equivalent to break on a string, and the solar panel if it is much string of 1 and that the solar panels will not generate electricity. 2, installation put solar panels on the indoor when charging, some customers will put solar lamp in a convenient parking relative parking at night, but at the same time also put solar panels in the barn, charging effect nature, so that we can use charging, outdoor, indoor discharge way installation of solar panels, separating from the lamp. Third, attention should be paid to avoid beside the solar panels have light source, as a reference in solar panels charging voltage in optical voltage above, not light. Such as other street by the side of the solar street light, the night falls, next to the way the light is on, led to solar panels solar street lamps detected light source that is the day, then the controller will control, won't make the lights on. Fourth, not to double side lighting, solar panel opposite tilt. Installation personnel in order to beautiful, may install the solar panel opposite tilting symmetric, but if one side toward is correct, then the other side must be wrong. The wrong side, because there is no way to direct light to the solar panel, charging efficiency will decrease. Five, the installation of solar panels Angle adjustment has a problem, lead to low efficiency of solar panels charge. Solar panels right Angle adjustment need to follow the principle of simple let sun solar panels, so that the charging efficiency is the biggest of all. In different places, the solar panels can be tilted reference local latitude, latitude is how much, how much horizontal tilt Angle of solar panels, so for different latitude and different pavement, adjustable Angle of solar panels is very critical. Sixth, do not lengthen solar panels cables; Some position because of interference to install solar panels is too much, just separate solar panels and light long distance, some customers have 10 a few meters separately even longer distance, and then to buy in the market in two core wires connected to. Because general of wire rod quality on the market itself is not very good, plus line distance is very long, line loss is very big, so the charging efficiency will reduce a lot, cause the lights on time. Seven, field personnel not correct use of the remote control projects is a problem, not bright lights parameter error. According to the scene to understand many times, some construction personnel feedback, did not know that the function of remote control purposes, in short rang up and lights on the matter. In fact, this time may have been set the parameter errors, resulting in abnormal light. All intelligent controller and mobile phone app and solar design. Easy and convenient, a key switch, need not worry about parameter setting error, need to switch to which model which model.