Rural solar street light debug work how to do

In the construction of rural areas, the road lighting system is a project that can not be neglected in engineering, in construction, many rural areas, now began to choose to use solar street lamp, although its installation is simple, but after installation, also is the need for

in the construction of rural areas, road lighting system is a project that can not be neglected in engineering, in construction, many rural areas, now began to choose to use solar street lamp, although its installation is simple, but after installation, also need to debug work properly, so as to ensure that provide normal lighting, solar street lamps Macao special lighting technician today give you summary about the content of the rural solar street lamps debugging time. 1, before installing the lamps and lanterns of fixed anchor, to determine the good solar modules daylighting is no barrier to keep out, if there is a big obstacle, lamps and lanterns must avoid installation or take other installation method and customer consultation. 2, embedded anchor, lamps and lanterns should be carried out in accordance with the relevant technical requirements, and after the installation of embedded parts reach regulation strength, to install lamps and lanterns. Installation steps cannot be wrong. 3, must be tightening bolts, loose or missing nut can't happen, so as to ensure the security of the solar street lamps provide lighting. 4, installation, wiring method line connected and are negative can not be wrong. 5, install lamps and lanterns is taking the right methods, and ensure the vertical light pole, and may not appear tilt. 6, adjust the solar battery components panel and make its facing due south, ensure the solar street lamps of large-area absorb sunlight, then power conversion. 7, after installation, can be the controller of by plate of the red and the black short few seconds later, have a look at the LED light source is normal. If the glow, the wiring and controller, after the good photovoltaic panels, if not light, check the wiring is correct. For solar street lamp installation and debugging work, is relatively simple, good grasp of the these points in the process of debugging, if the product is no problem, it can be normal glowing, correctly provide lighting effect. If there is a demand for solar street light products, welcome to Australia, lighting, here for you to provide diversified products LED street lamps, welcome to buy.