Road signal light pole light pole surface processing methods

Lamp posts are the ever-burning lamps of city, it is our lighting industry has brought the new space. Small make up today to introduce you to how to dispose of the surface of the common sense about it. Go to learn together. 1, was: 60 m/s; 2, the diameter is 80 mm; Next

light a beacon of cities, has brought the new space for our lighting industry. Today, I will send you a brief introduction to how to deal with the surface of common sense. Let's learn together. 1. Wind resistance: 60 m/s; 2. The upper diameter of 80 mm; ； 212 mm; Low caliber; 3. Choose Q235 steel tube wall thickness 4 mm, light pole height of 10 meters. 4. Lamp posts should undertake external and internal hot dip galvanized anti-corrosion treatment. The zinc layer thickness is greater than 85 um, accord with ZBJ3601 - 89 standard. Anti-corrosion life more than 30 years, covering 15 years does not rust. 5. Light pole by the high quality of hot rolled low carbon steel plate after plasma cutting, bending, and automatic welding. Weld in accordance with GB/T 3323 - 1987 level 3 standards, penetration is more than 85%. In this case, choose Q235 steel at baosteel, arm is 4 mm thick; 6. Light pole surface coating processing chooses 60 mm intelligence light pole disposable plastic spraying production line. The color specified by the customer. Outdoor use choose polyester plastic powder. Plastic layer thickness of more than 85 um, ensure uniform plastic layer, adhesion, uv protection, can packaging 10 years out. Introduced to the end of today. Thank you for your support. If you in this regard and requirements, please contact us. The above content from guangdong new energy lamp manufacturers. Please indicate whether the copy.