Recommended reading: the area of solar led street lamp installation condition dynamic | | industry lighting: solar led street lamp manufacturers in the countryside

Our solar led street lamp can have certain knowledge and understanding, such as environmental protection, no mains, installation convenient and so on characteristics, is well known, but solar street light is also have their own requirements of the use of some of the installation, for installation location conditions, of course, also have the same request, so to make the normal work of solar street light efficiently, to explore the regional let small make up with you guys for the installation of solar street light conditions have what distinction, because the use of storage battery and wiring will be affected by altitude, so use area elevation is a requirement for solar street lamps, solar led street lamp, suitable area will be at an altitude of 2000 m, equivalent to the plains of central and eastern parts of China. Second, the - 50 degrees & ndash; — 70 degrees is the use of solar energy street light, the best temperature too high temperature will cause the normal work of the solar street light can't be, too low will cause the temperature of solar street lamps run slower. Three, wind loading for grade 12 area can use the solar street light, because within 12 level wind will not damage to produce solar street lamps, so the domestic environment is suitable for use. Four, the seismic grade of solar led street lamp is 8, so in general is less damaged in the earthquake. Five, solar street light using the environment humidity is no more than 80%, otherwise it will be because of the humidity is too high, so that the electronic components be affected with damp be affected with damp unstable connection, lighting effects system cannot work normally, on the other hand, the basic solar street lamps can work normally.