Precautions before and after installation of solar street lights

With the improvement of farmers' living and material level, the demand for road lighting is also increasing. Nowadays, solar street lights have become a trend of rural road lighting and an important part of beautifying the appearance of rural areas. In order to ensure the correct installation of solar street lights, we have to do some preparatory work in advance.

. To understand the characteristics of solar lamps, light sources, and street light poles, according to the actual and reference lighting standards of the road, combined with investment budget, rationally choose solar lamps, LED light sources, and street light poles to give full play to the high efficiency and energy saving of the light source. The light distribution of lamps and the advantages of the combination of accessories.

.Under the condition of ensuring the light performance, appropriately increase the spacing between solar street lights to save the number of solar street lights; appropriately increase the height of solar street light poles to improve the lighting effect; as far as possible, place the poles in the middle of the road. , In order to save engineering costs.

. In combination with road engineering, intervene in pole position selection, foundation construction and pre-embedding in advance at the right time, so as to discover problems in time, make reasonable changes, ensure quality and save investment.

.According to the actual and geological conditions of the solar street light project site, design and manufacture the foundation of the solar light pole to ensure that the foundation is firm and reliable. Special attention should be paid to the adaptation of the embedded bolts to the reserved holes of the rod seat, accurate positioning, reasonable embedded length and external length, and proper protection of the threaded part to facilitate lifting and positioning.

.Pay attention to the beauty of the solar light pole after installation. Starting from the foundation construction, the straightness of the lamp position shall be controlled based on the main line, and the line shape of the road design shall be changed reasonably. The lamp pole shall be straight, and the welding seam and access points shall be processed to avoid the main line direction and the whole line shall be consistent. The inclination angle of the cantilever of the street light pole should be coordinated with the direction and angle.

.The internal fittings of solar lamps should be inserted tightly and firmly to avoid failure caused by loose wind pendulum and poor contact. Solar street light fixtures and lamp poles, lamp poles and cantilevers are reliably fixed.

The correct installation of the solar street light is extremely important. If there is an error during the installation process, it will affect its life and use effect. Therefore, the above precautions must be read carefully. If there is anything you don’t understand, You can directly consult our lighting technicians.