Popularize knowledge of the installation of solar photovoltaic power station for you

Generally in our country now the state is cement tile glazed tile roof of flat or small watts, the roof conditions generally can be installed, installed area mainly according to the roof is flat roof or inclined roof. Flat roof installed on the ceiling for

in general, our country the present condition of roof is cement tile, glazed tile, flat roof or small tile. Usually these roof conditions can be installed. The installation area depends primarily on the roof is flat roof or inclined roof. Flat top loader flat roof is named because the roof is flat, so when installing a photovoltaic system, there are a lot of the design requirements. First of all, should consider the local light, components should receive as much sunlight. Second, the front and rear parts of shielding should be considered. In order to get better light, should the tilt Angle of photovoltaic arrays and partial size to 0 degrees. If the array has a Angle, area of the natural will be very big, so the photovoltaic system flat roof installation of roof area. In general, the roof of the 1 kw system covers an area of 15 20 square meters. If the user wants to install 5 kw photovoltaic system, the roof of the area is about 75 - he needs 100 square meters. Sloping roofs usually, inclined roof installation of photovoltaic power generation system, facing the south. Roof is supported by bracket and photovoltaic module is fixed on the bracket. In general, occupy the 7-1 kw system The roof of 15 square meters area. If the user wants to install 5 kw photovoltaic system, the roof area of about 35 - required 75 square meters.