loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

Parameters and structure of LED high pole lights

The world is advocating green new energy lighting. Traditional high-pole lighting is gradually being replaced by LEDs. At this stage, the light source has begun to change. High-power LED street lamp heads are slowly replacing high-pressure sodium lamps.

The height of our conventional led high pole lights is generally from meters to meters. The height above the meter is divided into three sections, and the section below the meter is divided into two sections. There is a lamp panel and a lightning rod on the top. Because of the high height, it must be grounded. The lamp panel is generally It is fan-shaped or round. The rod type is generally hexagonal, octagonal or twelve-corner. The cone type is less difficult to roll, and the price is relatively high, which is not practical. Almost all customer requirements for spray color are pure white. Light source LED, commonly used specifications LEDW, W, W, etc. Configure multiple light sources according to lighting needs.

Parameter structure of led high pole light:

Light pole: material Q steel; anti-corrosion adopts hot-dip galvanizing treatment;

Light pole connection: docking type;

Light pole design: wind pressure resistance.kpa.

Lamp panel: The material is Q hot-dip galvanized steel frame; the lighting range can reach M.

Lamps: The lamp is equipped with aluminum die-casting shell, toughened glass light cover, protection grade IP;

Light source: Use LED flood light with long life, high efficiency and low energy consumption.

Lifting mechanism: The lift is installed in the light pole, and the lifting speed is .m/min-m/min; the mechanical limit device is equipped with a torque protection device, and the machine can be lifted by hand when the power is off.

Electrical control: The electrical box is placed in the high pole lamp door, and the lifting operation is controlled by the button box at a distance of meters away from the lamp pole; time-space or light control can be designed to achieve full-load lighting and partial lighting.

High pole lamp series

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service