Monitor the fixed principle of lever

Monitor light pole fixed principle is introduced, traffic lights manufacturer introduce small make up to you, the main contents are as follows: in the assembly when monitoring the lamps, are generally through the cable from the monitor light pole in the middle to the bottom, and then so that it can be connected with cable at the bottom of the light,

this paper introduces the principle of monitoring the installation of the light pole traffic lights manufacturer to introduce to you. Main content is as follows:

in assembling the light monitoring, the cable is usually through the monitor light pole in the middle of the bottom, and then at the bottom and the cable connection, so you can light up. In the process how to fixed monitoring light pole? Elbow type monitoring lamp light pole manufacturing rod: the ball in the top of shaft fixed connection has two steel plate, the ball on the steel plate of the bottom of shaft and the light pole circumferential joint fixed; On the disc into the lamp post and fixed before welding, along the circumference of the bottom of the ball bearing balls into the ball inside the circle of brackets, brackets from the fixtures are the top in the lamp, make the lampposts, ball bearing and the brackets connection combination as a whole. Tilting monitoring light: light the bottom through a flange on the base, the light is equipped with axial card slot, upper monitor the flatness of the bottom of a lamppost segment chuck insert light period of axial card slot, a lower axial card slot and fixed by bolts, tabular chuck of the upper and lower segment through the rotation shaft fixed to the card slot, and lower in the upper section of the joint of the lateral has strengthen sets.