Master these techniques for lighting, life everywhere there are bright spots. - Lighting network

Guide language: light, is not only a part of the lack in the design of a space. It is stylist make the magic wand of space. Designers often use technique of different lighting reshape the space architecture, to the rich space level, and enhance the effect of the space stereo feeling, so as to build a bright or blurred space artistic conception.

light, is not only a part of the lack in the design of a space. It is stylist make the magic wand of space. Designers often use technique of different lighting reshape the space architecture, to the rich space level, and enhance the effect of the space stereo feeling, so as to build a bright or blurred space artistic conception. The whole is simply a uniformly illuminated uniformly illuminated the whole plane plane is referred to as - — Wash wall light, point is wide open and the set range of lamps and lanterns, usually used for large range of lighting. When set the indirect lighting, take big openings make indirect light spread to the entire plane. As long as the size of openings to be according to 1/10 of the wall height, the plane will be lit. Need to light up the plane, the greater the brightness you need more. If using the fluorescent tube, be about to set a few more columns. In continuous use canister light, tube light more densely arranged in the gap, so the plane would be evenly lit. A location near the plane will be lit, in order to make the light into the distance, can use the lamps and lanterns of narrow beam Angle. Shoots as far as possible in order to eliminate the light shadow, gap must have depth, or the use of diffusion light lens that light horizontal development. Set the spacing between the wash wall lamp and so on, should use can make the whole plane evenly illuminated with the light. In general, leave the distance of metope and interval of lamps and lanterns is the ratio of 1:1, lamps and lanterns of distance open also won't appear the shadow control the ratio of 1:1. About 2. Then leave the distance of metope of lamps and lanterns is about 1/3 of the ceiling height. If you want to wash the wall lamp near the wall, can reduce the wattage and reduce the size of the lamps and lanterns of lamps and lanterns, then add a certain number of lamps and lanterns. Eliminate a uniformly illuminated light source of existence and in order to eliminate the presence of the light source, you must first ensure that no matter where all can't see the light. Then, the important thing is can't have any shadow on the surface of the light. As shown in the above make the whole space even light. In order to do no matter from which direction can directly see no shadow fluorescent tube, can choose to set the mask. The so-called mask is in order to make the light on the ceiling or side beam of light to achieve uniform and setting, similar to the mirror. Perfect linear linear illumination can make whole space becomes extraordinary, and it's also light guiding people's eyes, always will fold vertical element extends to the ceiling, become a visual focus, not to be missed. In the eyes of the designer, the light can be any a kind of simple sense, they are not only apply lighting to the atmosphere of the space sublimation to a certain state, also can effectively make up for the inadequacy of dimensional administrative levels.

hao star lighting lighting design