Lithium battery solar street lamp installation direction wiring method Ann solar room

one The installation direction when installation must be down at the end of the cable installation. two Wiring method 1. Lithium batteries and LED lighting wiring method of the load output: is the cathode ( The red line represents the positive and the black thread on behalf of the cathode) ; The positive and leds are connected to the positive, negative and LED lamp cathode



a. Installation direction

when installation must be down at the end of the cable installation.

2. Wiring method

1. Lithium battery, and the connection method of leds

load output: is the cathode ( The red line represents the positive and the black thread on behalf of the cathode) ; The positive and leds are connected to the positive, negative and connected to the cathode of the LED lights.

2. The connection method of lithium battery and solar panels, solar energy input: is the cathode ( The red line represents the positive and the black thread on behalf of the cathode) ; The positive and solar panels are connected to the positive, negative and solar panels are connected to the cathode.

the lithium battery all-in-one light state description

3, installation steps

1, all the cables connect well, check the charge indicator ( Green light) Whether the normal light [ No paper - the term changliang】 。

2, normal light, such as 10 seconds after pulling out the solar energy input, the output load normal bright LED lights.

3, to connect the solar input, load output leds put out after 10 seconds.

4, after all the steps above, solar street light can be normal use.

4, common problems

1. Solar energy input: if the solar input connected to the green light is not bright, there are two possible:

first solar 【 America's first solar ( 第一太阳能公司) Is the world's largest thin-film solar module manufacturers. 】 May pick up the input connection, if meet the please click the above step 2 connection correct connection method.