Light, what are the process?

Along with the development of the street lamp industry, more and more manufacturers began to produce high lamp, each manufacturer use technology is also different, so will lead to differences in technology, here we come under the specific understanding of in the lamp production

with the development of street lamp industry, more and more manufacturers began to produce high lamp, each manufacturer USES the technology is different, so will lead to differences in technology, let's come under the specific understanding of some commonly used in street lamp production process.

at present, the most commonly used is to hot rolled steel tube galvanized, and then high temperature electrostatic spraying process, is widely used in street lamp of process design.

1, the light pole high temperature electrostatic spraying

the powder coating has advantages of good adhesion, but also a very important advantage is the hardness is very high, but if the choice is bad material is prone to defects such as light loss is small, easy pulverization. Good powder can buy light color 3 years or so, but if it is not good to the powder is often less than a year can appear light and color, appear pulverization phenomenon. Recommend the use of excellent weatherability pure polyester paint, can use more than 7 years.

2, light pole spraying

there are many different kinds of paint, when we were in high lamp design need to choose the right paint, correct construction is an important factor to ensure the quality of the paint construction. Most of the light pole service life is longer, require high weatherability, suggest that we can use fluorocarbon lacquer and acrylic polyurethane paint. Also need to pay attention to the base material of light pole is usually USES is Q235 steel, therefore should choose is suitable for the special primer, 235 steel shall not be used alkyd antirust paint or high build red lead antirust paint. We all know that for street lamp, there is a requirement in terms of aesthetics, so can not take daub coating is too thick, or appearance will be more bad, you can use paint, epoxy mica core achieve better cosmetic results.

when buying high lamp in addition to notice the process design problems, also look at how the manufacturer, should choose those with professional design, production and after-sales service team, can provide customers with professional knowledge and advice. The company for cooperation.