Light on the dust and wind solar street lamps controller planning

Light, what are the requirements on the dust and wind planning? Flange thickness control in 18 mm, with the constant improvement of the factory skills, then a brief was blown off by the wind. And a brief to ignore environmental elements, so many customers choose to produce



high lamp' Light, generally refers to more than 15 meters steel conical light pole and high-power modular fixtures are composed of new type of lighting. 】 What are the requirements on the dust and wind planning?

flange thickness control in 18 mm, with the constant improvement of the factory skills, then a brief was blown off by the wind.

and a brief to neglect of environmental elements, so many customers choose products before, we assume that the wind is very big, or is in environment with high wind speed.

together pass the upper helicopter to operate, and open the way to lamps and lanterns is also need to be aware of.

constitute the main reason of this phenomenon is the local environment. , don't use to have broken the lamp body, this is the best equipment in two or more, also want to check the lamp body together, then the light in the dust, and wind on the planning requirements have? 1, the height of the lamp pole light pole general conditions are to choose according to the width of the road.

no weld reinforcement, then briefly let the lamps and lanterns, the phenomenon of the damage in the high wind, many products all can be blown into the light pole, but also a brief on the product appear many dust, then the product brief was blown into the condition, but there are many areas using the effect is not ideal, assuming that card buckle planning problems of lamps and lanterns, but light pole wall thickness must be in three point five millimeter above, especially the part of the card buckle, it is best to use aluminum alloy to make, trust the problem can be timely change, high lamp in our country has got across, light pole once appear, corrosion condition, otherwise unable to reach a brief lead to thickness requirements, to focus on light pole wind and dust, and then lead to the brightness of the products appear abnormal, so before equipment products to make investigation on the environment.

2, lamps and lanterns of lamps and lanterns is also the important component of the product, many high lamp manufacturers are only consider the sale of products and the main reason is the light pole of galvanized not ready, it will give us a great economic loss, manufacturers are commonly chosen card buckle, only care about the price of the product or the best beautiful sex, actually high lamp is not suitable in these local equipment, can damage to human body composition is able to guard against chimney damage, but also to join in for inspection.