Light, Led traffic light and durable street lamp manufacturers is proportional to the maintenance

Select the LED lamps and lanterns, doubtless is considering it more energy-saving, environmental protection. But in the long time of use case, LED lamps and lanterns has same wear, plus some fault operation, easy damage of LED lamps and lanterns. Even led traffic lights, also needs to have a good maintenance warranty

when choosing led lamp, everyone think that there is no doubt that they are more energy-efficient, more environmentally friendly. However, in the case of long-term use, led lights have the same wear, and because some wrong operation, led lamp is very easy to damage. Even the led lights also need good maintenance and protection, in order to achieve better effect and longer service life. The use of the low light emitting diode lamp 1, after reading this book to buy lamps and lanterns, don't busy installation, carefully reading devices, and then according to the equipment installation of lamps and lanterns. Otherwise, the risk may occur. 2, don't change the structure of the lamps and lanterns during cleaning and protection, don't change the internal structure of the lamp or light components. Protection, lamps and lanterns should be installed according to the sample, do not leak or misplaced parts of lamps and lanterns. 3. Do not frequently switch used lamps and lanterns, as far as possible do not frequently switch lamps and lanterns. Although leds light switch resistance is about 18 times that of the common fluorescent lamp, but too frequently switch will still affect the service life of led lamp in electronic components, and then affect the service life of lamps and lanterns. 4. Prevent wet need special attention is, in addition to special led traffic light, general led lights use should be avoided in damp environment. Moist environment will affect the LED drive power supply of electronic components. If the electronic component is affected by the moisture, the life of the light decreases. Low low light emitting diode lamp maintenance hint 1, moisture is the key to lighting maintenance, especially in the bathroom, bathroom led lights and headlight on the kitchen stove, to install the moistureproof lamp shade, to prevent moisture intrusion, prevent corrosion damage or leakage short circuit. 2. Don't rinse the led lamp. With dry cloth to wipe clean. If you are not careful, try to wipe them. Don't immediately with a damp cloth to wipe after turn on the light. 3, avoid in high temperature and high humidity environment, led lighting lamps and lanterns is commonly used in the temperature is 5 ~ 40 ℃ environment. 4. Light emitting diode lamp is mainly composed of power supply, it is recommended that the non-professional personnel not to tear open outfit, so as to avoid danger such as electric shock. 5. Leds light metal part cannot use chemical polishing powder, etc. Should use dry cloth or cloth clean led lights on the back of the dust. 6. Regularly check the indoor light, especially the droplight. On the one hand, it is necessary to check whether the circuit is aging, on the other hand, it is necessary to check whether chandelier hanging. Chandelier hanging in an important position or a busy place. Its stability should be very good. The use of led traffic light is related to electricity. You can't use this time to choose a defective product. Learn how to use and maintain dry goods. Light is more economic.