LED street light, straight rod street light and solar street lamps are the manufacturing process

Light pole is support bar street light head, is a major part of street lamp, lamp posts are steel plate, the LED street light to you today about the way light pole production flow: 1: roll cut the so-called roll cut material is used according to the drawings to

light pole is the rod support street light head, is one of the main components of street lamp. Light pole is made by rolling steel plate. Today, led street lamp manufacturers will introduce light pole production and manufacturing. 1: the so-called slitting roll cutting material is cutting and forming of the steel plate according to drawing, for the next working procedure. 2. Bent into a bucket of bending into tubular would mean a lamppost bent into a certain shape, showing the shape of the lamp post and into the next. 3. Lap welding rolled into the tubular light pole welding light pole sewn in intelligence. In this simple way, the welding is an important step for production of light pole, it directly affects the quality of the light pole and service life. 4. Alignment and bending deformation of the alignment was caused by welding, etc. If it is a straight rod, do not need to bend. Some of the light pole need to bend. 5: polishing brightening request smoothly polishing solder joints, polishing the rust, then on to the next step. 6: spray paint spray paint and electroplating and electroplating rust, used to prevent the light to ensure that its service life. 7: add electrical distributors to install street lamp. This lamp is to do so.