loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

LED street light pole design specifications and standards

The overall LED street light has specific specifications and standards before design. Whether it is LED street lamp heads, driving power supplies, LED street lamp poles and embedded parts, they all have design specifications and standards. These must meet the normal specifications and standards, so that the LED street lights can be used normally and safely. Today, the editor will mainly talk about the design specifications and standards of LED street light poles.

.Wall thickness:

The wall thickness of the light pole refers to the thickness of the steel plate used when making the light pole. Common specifications are mm, .mm, .mm, mm, and .mm.

.Round rod, vertebral rod:

The conventional types of street light poles include round poles and tapered poles. Round poles refer to the same upper and lower calibers. They are commonly used in occasions where the height of the pole is not high. Cone poles refer to the upper and lower calibers. On higher occasions, the vertebral rod has better mechanical strength and wind resistance than the round rod.

. Wind resistance level:

The wind resistance level of the light pole is directly related to the height and wall thickness of the light pole. We can design according to the different requirements of customers to meet the corresponding wind resistance requirements of the customers.

.Conventional light poles are coiled and welded with Q hot-rolled steel plates. After hot-dip galvanizing, they have good corrosion resistance and oxidation resistance. After the surface is sprayed, the corrosion resistance and oxidation resistance are further improved. Ability, the lamp pole after hot-dip galvanizing and plastic spraying has a service life of more than one year.

.The wall thickness of the street light pole should not be too small, because the light pole wall thickness that is too small will cause uneven roundness during the rolling process, which will affect the overall aesthetics and mechanical properties of the light pole, and the wall thickness of the light pole is too thick Thickness will increase the weight of the light pole and increase the cost. Therefore, when choosing a light pole, the lighter the lighter the better when meeting customer requirements.

.The diameter of the lamp arm is mostly mm, mm size, which can ensure the smooth installation and reliable fixation of the lamp. If the lamp arm requires a special size, it is necessary to add a reducing sleeve for the fixed installation of the lamp.

.When designing the wind resistance level of street light poles, you should know the basic information of the upper and lower diameter of the light pole, the wall thickness of the light pole, the size of the wind resistance, the height of the light pole, the material of the light pole, etc. You also need to know the length of the light arm and the battery Only by parameter information such as the size of the panel, the angle of the battery panel, the presence or absence of a wind generator, the size of the lamps, etc., can the wind resistance level design be more comprehensive, so as to fully ensure that it can meet customer requirements.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service