With the rapid development of society, the LED street light in the life of people more and more widely used, because it is used very widely, so you need often involves the problem of installation, the people at the time of installation, need to be aware of some matters needing attention of installation process, in order to make the street lamp after installation, can have a good using effect, after installation there is no safety concerns.
in the LED street lamp for installation, need to laying cable, cable typically longer, do not easily broken, at least three street light can't break the length of the cable, when the cable laying, the fewer the number of joint, the better, because the joint more, likely to appear in joint contact undesirable situation, it may appear circuit breakers, or a short circuit, short circuit may burn circuit, no matter which one will affect the use of street lamp.
in the street after the installation is complete, but be careful not to in the street lamp pole hanging banners, writing, etc. , to avoid the line damage. Joints in the cable line of the wire must be closely connected, and insulation processing, to ensure the construction of the street lamp to function.
LED street light is the product of high-tech, in the process of using, because of its technical development time is shorter, so such construction information is not complete, when it installation design, should be sufficient investigation, and then consider the various factors of design, combined with different installation area, in the process of installation in a simple practical as a starting point, the environmental protection, energy conservation and fully taken into account, and then considering the beautiful problem, so out of the street lamp installation, more can satisfy people's needs.
LED street lamp is becoming more and more common in our life, when to install it, need to be aware of some of the installation process matters needing attention, to make it after installation can better meet people's needs, to better serve the people.