loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

LED street lamp lighting design specifications and standards

- -

the LED street lamps in the whole design before there are certain specifications and standards. Whether the LED street light head, drive power supply, LED street lamp light pole and embedded parts, they all have the design specifications and standards. These are to achieve the normal specifications and standards, the LED street light to normal and safe use. Small make up today about the LED street lamp lighting mainly to tell you about the design specifications and standards.

. Wall thickness:

light pole wall thickness is used in making light pole plate thickness, mm, common. mm、. mm、mm、. Mm specification.

. Round bar, vertebral bar:

light pole conventional types with round rod and cone rod categories, round rod refers to the top and bottom diameter, commonly used in place of the light pole height is not high, vertebral bar refers to the top and bottom diameter is different, commonly used in place of light pole height is higher, vertebral rod less round rod has better mechanical strength and ability to resist wind.

. Wind loading:

light pole of wind loading directly associated with light pole height and wall thickness, we can design according to the different requirements of customers, meet customer's corresponding requirements of wind resistance.

. Conventional light pole use Q hot rolled steel plate welding and become, after dealing with the galvanizing has good corrosion resistance and oxidation resistance, surface after coating treatment further improve corrosion resistance and oxidation resistance ability, after hot dip galvanized coating light pole, for years of service life.

. Light pole wall thickness shoulds not be too small, because of the small light pole rolled thickness will appear in the process of roundness uneven phenomenon, affect global beautiful sex and mechanical light pole, a thick wall thickness will cause light pole light pole weight increase, rising costs, so the light pole choice, should consider to meet customer requirements under the condition of the lighter in weight, the better.

. Lamp of arm diameter for mm, mm size, more can ensure smooth for installation of lamps and lanterns and reliable fixation. If lamp arm requires special size, need to join the taper sleeve so that the lamps and lanterns for fixed installation.

. For light pole in the design of wind loading, will be aware of the fluctuation of the light pole diameter, wall thickness, and the size of the wind, light pole, light pole height, light pole material, such as basic information, also need to know the length of the arms, the size of the panels, the Angle of the panels, wind turbines, such as the size of the lamps and lanterns parameter information before it can be more comprehensive evaluation of wind resistance design, so as to fully guaranteed to meet customer requirements.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service