loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

LED lighting radiation safety

LED is a product of rapid development, LED and related accessories. The standard, the various countries and regions in the world is stepping up efforts to develop, the LED module of the control unit and LED module fittings standard IEC group has completed, about the LED as light source, safety standards and performance standards, IEC organization are formulated. In regarding to the radiation safety testing of LED lighting products, the requirements of each country in the world also have different, the United States to the LED lighting product adopted the most lenient policy, LED lighting products in radiation safety is considered safe, do not need to be tested. LED lighting products, say in Europe, there is a potential safety hazard, requirements in LED lighting products should comply with IEC/EN 60825 - 1 the laser product safety requirements part 1 equipment classification, requirements and user guide, chapter 1 - General requirements 'standard requirements. CTL 297/05 resolution for the use of LED lighting as the light source there is a clear requirement, leds shall conform to IEC/EN 60825 - 1 in the standard for products of the class 1 or class 1 m. But expensive testing in order to save costs, CTL resolution

three methods is given first, if the light intensity is low, such as common LED display or signal, most conforms to the IEC/EN60825 - 1 the requirements of class 1, so there is no need for testing. In the judgment, the lid, optical USES hand away and similar parts. In the report should be pointed out that the light intensity after a judgment in accordance with IEC/EN60825 - 1 standard class 1 laser, there is no test.

in the second place, in other cases, lighting equipment manufacturers should be required to provide a statement of the test (based From the LED manufacturers, for instance) To indicate that the LED module of radiation more than IEC/EN60825 - In the standard 1 class or with or without optical device when 1 m class requirements. In the report should indicate the judgment is according to a statement from the manufacturer.

3, if you can't provide a statement or we are not sure how to judge, should according to IEC/EN60825 - 1 standard for testing. Should be pointed out in the report have been measured. For belt belongs to class 2 laser categories of lighting light source, should be according to IEC/EN60825 - 1 standard the lighting as a laser treatment, the lighting equipment shall comply with the requirement of laser safety standards of

.

for manufacturer of LED lighting equipment, according to the CTL resolution can there are three ways to test the LED lighting equipment. The first is a statement, the second is according to the report or statement of monitoring results of the LED factory, the third is sent to the authority of the third party lab for the safety of radiation detection. If the LED does not belong to belong to class 1 or class 1 m, should according to the laser processing, the need to conform to the relevant laser product safety requirements of the

no

the semiconductor lighting network

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service