loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

Lamps and lanterns after decorating to maintain 5 rules should pay attention to

If you don't get proper cleaning and maintenance, high-grade lighting will soon. Same with the other furniture, lamps and lanterns also need regular cleaning and maintenance, to keep the brightness of the lighting, prolong lamp life. Chimney due to soil is dark, if not timely treatment, average around 30% a year to reduce brightness. Therefore, regular cleaning and chimney and tubes or bulbs is particularly important.

after the first, to buy back the lamps and lanterns, don't busy installation, should read the installation instructions carefully look at the mark of lamps and lanterns and, according to the instruction of installation, use the lamps and lanterns again, otherwise the possible danger;

the second, according to the sign to provide light source parameters in a timely manner to replace aging tubes, found on both ends of the lamp is red, black or dark, jump arranged not bright, should be timely replacement bulbs, prevent unsafe phenomenon such as ballast burn out;

the third, when cleaning maintenance should pay attention to don't change the structure of the lamps and lanterns, also don't replace the parts of lamps and lanterns, at the end of the cleaning maintenance, should install lamps and lanterns is good according to the sample, don't packing, wrong parts of lamps and lanterns;

4, lamps and lanterns is in use and to strengthen the maintenance and to prolong its service life. Room of tubes should often use dry cloth to wipe, and pay attention to prevent moisture intrusion, lest in the long run, the phenomenon of the corrosion damage or leakage short circuit; Lamp shall be installed in the toilet, bathroom equipped with moistureproof lamp shade, otherwise will shorten the service life; In the lamp of the kitchen should pay special attention to prevent lampblack, because oil accumulation will affect the light illumination; Light transmittance of light color lampshade is good, but easy to stick ash, must diligently to wipe, lest affect light penetration degree; If the lamps and lanterns of nonmetal, can use wet cloth to wipe, in order to avoid dust accumulation, interfere with the lighting effect;

5, when lamps and lanterns USES do not frequently switch as far as possible, because the lamps and lanterns at the instant of the frequent start, through the filament current is greater than the normal work of electric current, the filament temperature rise sharply accelerated sublimation, which will greatly reduce its service life, so try to minimize the switch of lamps and lanterns.

special remind

damp easily lead to rust, paint, lamps and lanterns will shorten the service life of lamps and lanterns. Therefore, moisture is the key to lighting maintenance, especially the lamps and lanterns of toilet, bathroom and kitchen stove headlights, all want to install the dampproof lampshades, in order to prevent moisture intrusion, avoid corrosion damage or leakage short circuit. It is best not to rinse the

lamps and lanterns, as long as can wipe with dry dishcloth touchs water, dry, if accidentally run into water to try to avoid by all means after turn on the light immediately with a damp cloth to wipe.

China lighting network pony

lighting network

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service