Introduction to yueyang solar street lamp installation considerations

On the use of solar energy street light, the installation is a more important point, combined with years of experience in installing, summarizes some useful techniques and matters needing attention. 1, the installation of solar street lamps should choose in sunny days, because rainy day after installation cannot quickly

in the use of solar street lamps, installation is a more important link, combined with years of experience in installing, summarizes several useful skills and matters needing attention. 1. Solar street lamp installation shall be carried out in the sunshine, because rainy days after installation can't quick charge and discharge in the evening, affect the use effect. 2. In order to prolong the use time of battery and charge and discharge time, installed on the first day of the should not turn on the light. Should be only controller connected correctly during the installation process, no load. The battery can charge for two days, and then in the second day on load, it can maximum limit to recharge the battery, the most thoroughly activate cells, and improve service time. 3. Controller should choose high quality waterproof products, to ensure that the use of time and stability. If there is no waterproof controller, should lower connection terminal, and will be connected to bend into U, in order to improve the waterproof ability. 4. The Angle of the panels must be adjusted to the most appropriate location, general advice Angle of 45 degrees. If done poorly, battery charging performance will be affected, illumination time shorten, induction performance would also be affected, automatic lighting time is not accurate. 5. Use good quality copper core, reducing power loss. If the problem is extremely serious, light emitting diode drive power will not be able to work properly. So don't save the necessary funds, influence the effect of the whole street.