Yangzhou yingli controller introduces, to buy back the lamps and lanterns, solar street lamps do not busy installation, should look at the tag of lamps and lanterns and read the installation instructions, and according to the instruction of installation and use of lamps and lanterns, otherwise there may be dangerous. At the sign
yangzhou yingli controller introduces, to buy back the solar street lamps and lanterns, don't busy installation, should look at the tag of lamps and lanterns and read the installation instructions, and according to the instruction of installation and use of lamps and lanterns, otherwise there may be dangerous. According to the sign of source parameters in a timely manner to replace aging tubes, found on both ends of the lamp is red, black or dark, jump arranged not bright, should be timely replacement bulbs, prevent unsafe phenomenon such as ballast burn out. When cleaning maintenance should pay attention to don't change the structure of the lamps and lanterns, also don't replace the parts of lamps and lanterns, at the end of the cleaning maintenance, should install lamps and lanterns is good according to the sample, don't packing, wrong parts of lamps and lanterns. Lamps and lanterns is in use and to strengthen the maintenance, to prolong its service life. Room of tubes should often use dry cloth to wipe, and pay attention to prevent moisture intrusion, lest time grew, the phenomenon of the corrosion damage or leakage short circuit. When using lamps do not frequently switch, as far as possible because the lamps and lanterns at the instant of the frequent start, through the filament current is greater than the normal work of electric current, the filament temperature rise sharply accelerated sublimation, which would greatly reduce its service life, so try to minimize the switch of lamps and lanterns. Recommended reading: how to identify the quality of the solar street light LED lamps and lanterns