Integrated explosion-proof platform light [BPC8730] high-level explosion-proof light

One-piece explosion-proof platform light [BPC] High-level explosion-proof lamps Date, Changzhou Lighting Factory Lighting This BPC one-piece explosion-proof platform light is designed with Waosram metal halide lamp, with high brightness, high luminous efficiency, and high intensity for safety and explosion-proof The gas discharge lamp is used as the light source, with high luminous efficiency, long life, and the average service life is over hours. It has good electromagnetic compatibility and will not cause interference to the surrounding environment. The exquisite structural design and good heat dissipation performance effectively reduce the temperature of the lamp body and increase the service life of the lamp. Light weight, small size, compact and beautiful, simple and convenient operation. Explosion-proof type * high explosion-proof grade, can be used safely in various flammable and explosive dangerous places. Main technical parameters Rated voltage VAC Hz Shell protection IP rated power: // MH/HPS gas discharge bulb inlet thread G/ lead-in cable φ~φmm overall size × × mm total weight Kg Explosion-proof class: ExdII CT① According to the actual work site If necessary, determine the installation location and method of the lamp, then prepare a three-core cable of corresponding length Φ～Φ mm from the lamp to the power contact, and thread the three-core cable into the laid steel pipe. ② Loosen the compression nut of the lamp cable inlet (it is equipped with the factory, and will not be used after the steel pipe is used), and the power cable is introduced to the internal wiring place, connected and fixed, and then tighten the cable steel pipe and tighten the lamp top Cover, tighten the set screws. ③ When replacing the bulb, unscrew the Phillips pan head screw that fixes the lamp ring, and rotate the lamp ring counterclockwise to separate the lamp ring and the transparent part from the housing, remove the bulb, replace it with a new one, and press the opposite Just install the light in the direction. Warning: When installing and maintaining the lamps, the power must be cut off. , Non-professionals are not allowed to install or dismantle lamps at will.