Installed in outdoor photovoltaic power station will be affected by damp?

Because to ensure the capacity of photovoltaic power station, installing a photovoltaic power station need to install where empty as far as possible, without sunscreen. Some customers have doubt: no shelter shelter, photovoltaic panels will be affected with damp be affected with damp? Will the leakage? Lightning strike? These problems,

because in order to guarantee the photovoltaic power station generating capacity, pv power station need to install open as much as possible, there is no shelter. Some customers have a question: if the photovoltaic panels can't wind or rain, they will be affected by damp? It will be the leakage? You will be struck by lightning? These problems are mostly concentrated in the safety of the photovoltaic power station. In fact, we don't have to worry about. These problems have been fully considered in the design. Photovoltaic panels photovoltaic panels have strict encapsulation process, including back and EVA film such as packaging materials, and through high temperature laminating processing. These materials not only waterproof, but also has good weather resistance and flame retardant, so the efficiency of the photovoltaic products won't be affected by climate change and environmental change. Photovoltaic panels, therefore, not be affected by damp. Second, even in the case of a lightning strike, the system itself also is equipped with lightning protection device. Lightning protection module is added to the junction box, inverter and other electrical equipment components of the system, in order to prevent the indirect lightning strike. In addition, the parent box, inverter and other equipment line has the overload protection function. If the voltage is abnormal, the system will automatically shut down and disconnect. As for the leakage problems, technicians are ready to leakage protection in the construction work, don't worry about it. Only need to pay attention to is the snow weather. The snow on top of photovoltaic panels should be clear to prevent excessive components to freeze.