Installation explanation of split anti-glare floodlight NFC9112 anti-glare ceiling light

Split-type anti-glare floodlight NFC anti-glare ceiling light installation explanation year, month and day, this NFC anti-glare floodlight brought to you today, let us take a look at its installation method and detailed parameters. Use a socket wrench to unscrew the two fastening bolts on the ballast box cover, open the ballast box cover, and introduce one end of the three-core cable of the lamp into the ballast cavity through the introduction device of the ballast outlet Inside, connect the yellow-green wire, blue wire, and brown wire to the ballast terminals No., No., and No., and then use the lead card to compress the three-core cable before tightening the compression nut. According to the site environment and lighting needs, determine the installation location and appropriate installation method of the lamps and ballasts. According to the distance from the ballast to the V power contact, prepare a three-core cable with a corresponding length of φ~mm. In the determined installation position, fix the lamp and the ballast. When replacing the bulb, first cut off the power, loosen the lock nut on the side of the lamp cap, open the lamp cap through the hinge flip mechanism, unscrew the old bulb, and replace it with a new one. Close the ballast box cover and tighten the fastening bolts, and then connect the other end of the three-core cable to the V power supply to achieve lighting. Pass one end of the prepared three-core cable into the ballast cavity through the lead-in device of the input port of the ballast box, and then connect the L wire, N wire and ground wire to the ballast, and number positions respectively. On the terminal, and tighten the three-core cable before tightening the compression nut. Rated voltage VAC Hz enclosure protection IP rated power: // MH/HPS gas discharge bulb inlet thread G/ lead-in cable φ~φmm shape size lamp body φ×mm ballast box××mm