Incorrect erection solar road henan road lights lamp how to solve

Mistake to install solar street lamps how to solve with the new rural support of propulsion, a growing number of solar street light to replace the traditional grid street lamp. It used to be a reasonably good, but because no professional construction personnel in the actual installation



mistake to install solar street lamps how to solve the

with new rural support full, more and more solar street lamp to replace the traditional grid street lamp. It used to be a reasonably good, but because in the actual installation without professional construction personnel for installation, many customers still following the traditional way to install solar street light, caused the lamp holder not shine after installation, or evening light soon not shortcomings. Installation problems, will naturally to the normal street light can't shine, cape below lighting electric solar lighting for master rural several wrong installation of solar street lamps are summarized and its solution. A place too many obstructions, install solar street light is through the top solar photovoltaic panels absorb sunlight, then converted into electrical energy stored in the storage battery, night again through the battery discharge to power leds for lighting. So night can normal lighting, solar street lamps depends on solar photovoltaic panels can receive the sunlight in the day, if too many obstructions around the solar street lamps, such as: the leaves can cause shade, building and so on, affect the normal absorption of the solar surface light source and operation, resulting in a decline in charging efficiency. Solution: when installing solar street lamps should be far away from obstructions, if can't steer clear of obstructions, to ensure that the solar photovoltaic panels of the south mark purpose no obstructions, or light time not less than 6 hours. Two solar street lights, solar street lamp beside other source is intelligent street lamp, it can operate by photovoltaic panels relating to the differences of the four seasons dark time to adjust, don't need to reward. If there are other light around the photovoltaic panels, leads to a light-activated spirit, solar street lamp light in nature cannot be normal. When installing a solar street lamp, stay away from other light sources, to avoid interference. Solution: if the solar street light has been installed, found its photovoltaic panels with light source and can't remove, should be adjusted in time control mode. Three, solar panels on the indoor charging customers for the sake of brevity, install solar lamp indoors, such as building convenient traffic or parking in the island, carport, although the location of the day there is a light, but short of the demand of the fully charged, long-term growth, easy to cause damage or completely damage of the battery. Solution: if you want to have the abundant light, solar street lights will move solar photovoltaic panels to outdoor, if must solve indoor lighting, also can use, outdoor, indoor lighting installation way of splitting up. Four, photovoltaic panels towards mistakes need to install photovoltaic panels before stem secured the photovoltaic panels shall, if discovered after stem photovoltaic panels towards rendering errors, will result in photovoltaic panels can't fully absorb sunlight to charge. Solution: first to determine the underlying purpose of LED light, and then determine the towards of photovoltaic panels, install photovoltaic panels should be toward the sun is the most abundant the underlying purpose of installation, in the domestic generally faces south, divergence Angle of photovoltaic modules output may also be affected.