How would improve the excellent properties of light

As we are one of the most common public facilities, street lights appear not only in our travel at night, at the same time, also reduce a lot of traffic accidents, so, this kind of lamp in use our high lamp manufacturer which maintenance process to it?

1, the lamp should be firm, not loose, askew phenomenon.

2, enamel lampshade corrosion, deformation should be replaced.

3, lamps and lanterns of mirrors in the transport, installation process should not damage or deformation, should add aprons, chimney brush try bright, light is porcelain dew copper when broken, should be change.

4, a lamp is suitable for various specifications of the light bulb, lamp mouth protection should be adjusted to the same position and bulb capacity, the optimal light distribution curve.

5, chimney should be intact, no broken.

6, the lamp body should be hoop pole, device and submissive should not be too long.

7, lamps and lanterns and light body cannot bend, the parts add spring eyeliner fixed screw tight, loose declined.

8, lamps and lanterns dustproof felt strip to complete, do not want to take in.

9, transparent cover retaining ring should be full of to use, to prevent the cover off application reliable hook.

10, lamps and lanterns reflective mirror surface failure, should be replaced.

11, all kinds of iron had no serious corrosion or cracks, scars, and so on and so forth paint corrosion should be cleaning brush paint or galvanized.

12, transparent cover and reflector lamp body maintenance should be cleaning wipe clean, not cleaning the site should be replaced.

13, closed the lamp holder of lamps and lanterns, lead heat insulation pipe protection should be adopted.

14 tuo, lamp and tube flange must form a complete set you have crack have scars, the screw to complete, tuo flange bolt length should be able to penetrate a lamp.