loading

We are a leading manufacturer of solar power utilization and lighting systems                   Mob:+86 199 2801 5868

How to troubleshoot solar street light battery short circuit fault?

Solar street light lead battery short circuit refers to the connection of the positive and negative groups in the lead battery. The short-circuit phenomenon of lead batteries in solar street lamps is mainly manifested in the following aspects:

1. The open circuit voltage is low, and the closed-circuit voltage (discharge) quickly reaches the terminal voltage.

2. When the high current is discharged, the terminal voltage rapidly drops to zero.

3. When charging, the temperature of the electrolyte rises very quickly.

4. The voltage rises slowly during charging, and always remains low (sometimes drops to zero).

5. When the circuit is open, the electrolyte density is very low, and the electrolyte will freeze at low temperature.

6. No bubbles or gas appears late when charging.

7. During charging, the density of the electrolyte rises slowly or almost unchanged.

The reasons for the short circuit of the lead-acid battery of the solar street light mainly include the following aspects:

1. The poor quality or defect of the separator allows the active material of the plate to pass through, resulting in virtual or direct contact between the positive and negative plates.

2. The positive and negative plates are connected due to the displacement of the separator.

3. Conductive objects fall into the battery, causing the positive and negative plates to connect.

4. The 'lead current' formed during the welding of the electrode group has not been eliminated, or there is a 'lead bean' between the positive and negative plates during assembly, and the separator is damaged during charging and discharging, resulting in the connection of the positive and negative plates.

5. The active material on the electrode plate expands and falls off, and the falling active material is deposited too much, so that the lower edge or side edge of the positive and negative electrode plate is in contact with the deposit, resulting in the connection between the positive and negative electrode plates.

Outdoor solar street light, semiconductor lighting, is a solid cold light source, with the characteristics of environmental protection, no pollution, low power consumption, high light efficiency and long life. Environmentally friendly solar street lights are crucial to energy saving in urban lighting.

GET IN TOUCH WITH Us
recommended articles
Knowledge News & events Project
ALLTOP Cordially Invites You | Join Us at WETEX 2026 Dubai Solar PV Exhibition to Explore New Opportunities in the Middle East PV & Energy Storage Market!


Exhibition Name: WETEX 2026
Exhibition Dates: October 20–22, 2026
Venue: Dubai World Trade Centre · Dubai, UAE
ALLTOP Booth: 4C14
Warm Invitation | ALLTOP Debuts at the 140th Canton Fair, Jointly Witnessing a New Future of Green Energy

Exhibition Name: The 140th Canton Fair)
Exhibition Dates: October 15–19, 2026
Venue: China Import and Export Fair Complex, Guangzhou, China
ALLTOP Booth: Zone C · Hall 16.4 · Booths C34-C35, D08-D09
Golden Topping-Out Marks a New Milestone, Output Value Exceeds RMB 600 Million! ALLTOP Industrial Park’s 168,800 m² Project Successfully Topped Out

318 Days—Less Than a Year!

At the “Speed of Light,” from Blueprint to Topping-Out.

50.24 mu of Prime Land, 168,366 Square Meters of Intelligent Manufacturing Space,

Annual Output Value at Full Production Exceeding RMB 600 Million.

ALLTOP Speed, Formidable Strength, and a Promising Future!

Golden Topping-Out Shines, Output Value Soars
The Hype Is On! ALLTOP Draws Global Spotlight at the Solar Expo — Join Us for a Chat
SOLAR PV & ENERGY STORAGE WORLD EXPO 2026

Booth No.: 10.2· B551
Time: September 16–18
Address: China Import and Export Fair Complex, Guangzhou, China (No. 382 Yuejiang Middle Road, Haizhu District, Guangzhou)
ALLTOP UGANDA Invites You to Power and Elec Expo 2026

Exhibition Name: Power and Elec Expo 2026

Date: July 9th-11th 2026

Company Name: Alltop Engineering Uganda

Hall No.

Booth No. A45

Venue: UMA Show grounds, Multi-Purpose Hall, Kampala-Uganda
Our aim is to provide the best products and the most considerate service for customers.
About Us
Customer service