How to set up six meters tension spring light, solar street lamps

How to set up the light of the tension spring need? High lamp manufacturer small make up to you, main content is as follows: 1. Disconnect the power supply, open the box machine, out of the box cover, remove the lid; 2. Use hex wrench to adjust each tension spring screw. Drop high lamp in the lever to turn to



high lamp tension spring need to how to set up? High lamp manufacturer small make up to you, the main contents are as follows:

1. Disconnect the power supply, open the box machine, out of the box cover, remove the lid;

　　2. Use hex wrench to adjust each tension spring screw. Make the light reached the best effect when the down rod is running; Xi 'an solar street lamps

3. If the rod moment rod vibration phenomenon, clarify balance spring tension is too large, repeat the above operation;

　　4. Bring about 7 brake power, according to the controller or ▼ button, make the light running four to five times up and down 90 degrees, such as pole moment pole present flutter phenomenon, the light goes in straight condition.